• Anonym (Diamant)

    Diamantkvalitet! Hjälp snälla!

    Jag har fått ett erbjudande om att köpa en brilliantslipad diamant på 0.70 carat. Den är i färg Crystal (J) och har en klarhet på VS2. Jag kan köpa den för 2000 kronor men jag skulle behöva hjälp av er att bedöma om ni tycker att det är värt det? Jag vet att det inte är den bästa kvaliten på stenen och jag undrar om gulheten kommer synas, lika så inneslutningarna. Någon som kan hjälpa mig?

  • Svar på tråden Diamantkvalitet! Hjälp snälla!
  • Anonym (Diamant)

    Hur blir det när den har en lätt flourescens?

  • Anonym

    Om du vill ha en sten med bra färg och klarthet men inte allt för dyr skulle jag nog satsa på minst på en Wesselton sten ( inte mer än bokstaven H, du hade J i ditt exempel) och SI1 eller  VSI.
    Sen spelar så klart slipning roll men här har jag dock inte så bra koll.

    topcrystal.eu/10.html  du kanske kan kolla lite på länken oxå.

    Om du har fler ringar på fingrarna med diamanter syns det om det är olika kvaliteér på stenarna.

  • Anonym (Diamant)

    Kommer satsa på en sten med bättre kvalitet tror jag! Är ju öppet köp så jag kan alltid beställa och sen lämna tillbaka om jag inte är nöjd

  • Juul
    Anonym (Diamant) skrev 2012-01-24 19:45:08 följande:
    Hur blir det när den har en lätt flourescens?

  • Anonym (Diamant)

    Tack för alla era svar! Kollade lite i andra trådar och där påstår andra att en crystal diamant inte alls är gul och att den är väldigt prisvärd! Men OM jag skulle köpa av lite sämre kvalitet, vilket av dessa alternativ är bäst då? En diamant med färgen crystal (j) och Klarhet vs2 eller en diamant med förgen top crYstal (i) med klarhet si2?

  • Anonym (Diamant)

    Juul - vad hjälpsam du är :) tack!

  • Juul
    Anonym (Diamant) skrev 2012-01-24 23:45:08 följande:
    Juul - vad hjälpsam du är :) tack!
    Glad...Det var så lidt.....o lycka till!
  • KhiraLii

    Jag skulle valt J över SI2 om jag inte får titta på stenen själv för risken är att du har synliga inneslutningar i en Si2 och även sådana som kan förminska hållbarheten på diamanten.

    Hur gul en diamant upplevs beror på flera faktorer. Om man jämför briljanter mot varandra så spelar slipningsgraden roll och likaså ev fluorescens. En dåligt slipad H-I kan upplevas gulare än en toppslipad J.

    Mellan-stark fluropescens kan göra att en diamant upplevs vitare men det finns även en risk att hög fluroescens gör stenen mjölkig. Stenar med hög fluroescens behöver bedömmas på individuell basis.

    Här har du ett jättebra filmklipp där Jonathan (som är mkt känd i diamantvärlden) visar upp hela färgskalan och vilka skillnader man kan förvänta sig att se när man tittar på diamanterna uppochner och uppifrån (man ser mest färg uppochner)





    Diamantens färg har ingenting med kvalité att göra utan det är helt och hållet en personlig preferens och vissa kan inte tänka sig annat än en kritvit diamant och andra vill hellre ha en lite varm nyans.

    Skall du sätta diamanten i gult guld spelar det mindre roll för oavsett färg så kommer diamanten fånga upp gula reflektioner. Likaså om du har en gul tröja eller gula väggar etc.

  • KhiraLii

    Jag kan ju tillägga att detta är GIA diamanter i klippet. Om du har ett annat certifikat än GIA, AGS eller HRD så kan du räkna med att den färgen som anges i certet motsvarar en GIA diamanten med 1-2 grader sämre färg. Tex en H med EGL cert är motsvarar en GIA med I-J färg

  • Anonym (Diamant)
    KhiraLii skrev 2012-01-25 11:17:33 följande:
    Jag kan ju tillägga att detta är GIA diamanter i klippet. Om du har ett annat certifikat än GIA, AGS eller HRD så kan du räkna med att den färgen som anges i certet motsvarar en GIA diamanten med 1-2 grader sämre färg. Tex en H med EGL cert är motsvarar en GIA med I-J färg
    tusen tack för hjälpen! jag hade tänkt ha 18k gult guld så då kanske inte den gula färgen syns lika mycket som om man hade den i vitt guld?
  • Juul
    KhiraLii skrev 2012-01-25 11:15:28 följande:
    Jag skulle valt J över SI2 om jag inte får titta på stenen själv för risken är att du har synliga inneslutningar i en Si2 och även sådana som kan förminska hållbarheten på diamanten.

    Hur gul en diamant upplevs beror på flera faktorer. Om man jämför briljanter mot varandra så spelar slipningsgraden roll och likaså ev fluorescens. En dåligt slipad H-I kan upplevas gulare än en toppslipad J.

    Mellan-stark fluropescens kan göra att en diamant upplevs vitare men det finns även en risk att hög fluroescens gör stenen mjölkig. Stenar med hög fluroescens behöver bedömmas på individuell basis.

    Här har du ett jättebra filmklipp där Jonathan (som är mkt känd i diamantvärlden) visar upp hela färgskalan och vilka skillnader man kan förvänta sig att se när man tittar på diamanterna uppochner och uppifrån (man ser mest färg uppochner)


    " target="_blank">



    Diamantens färg har ingenting med kvalité att göra utan det är helt och hållet en personlig preferens och vissa kan inte tänka sig annat än en kritvit diamant och andra vill hellre ha en lite varm nyans.

    Skall du sätta diamanten i gult guld spelar det mindre roll för oavsett färg så kommer diamanten fånga upp gula reflektioner. Likaså om du har en gul tröja eller gula väggar etc.
    "Mellan-stark fluropescens kan göra att en diamant upplevs vitare men det finns även en risk att hög fluroescens gör stenen mjölkig."

    Fluoro can be faint to very strong, and the most common fluorescent color is blue. As blue is the complimentary color to yellow, the most common tinted color in diamonds, blue fluorescence can make yellowish diamonds look white or colorless. A blue fluorescence can help increase the prices of diamonds with yellowish tones. A strong yellow fluorescence bring diamond prices down, sometimes quite a bit, since yellowish tinted diamonds are generally less desirable than whiter stones. The "Hope" Diamond has a strong blue fluorescence! (who cares)

    "Diamantens färg har ingenting med kvalité att göra"...I DO NOT agree with what u say!




    He also talked abt fancy color diamonds at the begining of the video. They're sth else. And they can really get expensive.... Video 05:25min...It showed 1ct D color, IF(clarity) to 1ct E color, IF(clarity) is $ 7,300 per carat!

    "det är helt och hållet en personlig preferens och vissa kan inte tänka sig annat än en kritvit diamant och andra vill hellre ha en lite varm nyans.".....I agree with this.

    If you have unlimited resourses, then the finest of all three elements (colour, clarity, cut) is the best diamond for you. But if your funds are limited then the best looking diamond is frequently that diamond with the highest (least) colour and the best cutting. Unless the marks in a diamond are either eye-visible or potentially damaging, who cares! People get all hung up on VVS and VS grading...neither of which the naked eye can detect (if you can see the marks, it "ain't" VS, or SI for that matter). If the diamond is an engagement stone, chances are you will not be buying it in order to resell it. That being the case, cutting and colour are the most important elements in determining how beautiful the diamond can be. If your funds are very modest, go for finest cutting every time!
    Grading scales In India, Colour takes precedence over Cut. The order or priority for most Indian customers if Colour -> Cut -> Clarity.
    In Southern India, where most customers are particular about dosham (defects), clarity is the most important consideration in selecting a diamond. Here, the order of priority is Clarity -> Colour -> Cut.
    However, if a customer asks for a recommendation, Carat Lane always advices them to prioritize Cut and Colour over Clarity. This is because diamonds up to S1 grade are "eye clean". The inclusions are visible only under the loupe to a trained eye, and does not make any difference to the way the diamond looks.

    The quality of a diamond has three components. Clarity and colour are important but the third element, cut, determines how beautiful the finished diamond will be. Remember, fine colour and fine clarity are all well and good, but without really good cutting your diamond is not going to be as beautiful as it can be.


    so...Which one would u like to choose?
    Glad

    0.70ct, SI2, I color, 3EX

    0.70ct, VS2, J color, Good cut
  • Anonym (Diamant)

    Oj :) jag lär mig riktigt mycket här! Det står inte vilken cut diamanten har men jag mailat och frågat så det hänger lite på det nu! Det är i och för sig 30 dagars öppet köp med så jag kan ta diamanten till en juvelare så kan de kika på den!

  • KhiraLii
    Juul skrev 2012-01-25 17:56:55 följande:
    "Mellan-stark fluropescens kan göra att en diamant upplevs vitare men det finns även en risk att hög fluroescens gör stenen mjölkig."

    Fluoro can be faint to very strong, and the most common fluorescent color is blue. As blue is the complimentary color to yellow, the most common tinted color in diamonds, blue fluorescence can make yellowish diamonds look white or colorless. A blue fluorescence can help increase the prices of diamonds with yellowish tones. A strong yellow fluorescence bring diamond prices down, sometimes quite a bit, since yellowish tinted diamonds are generally less desirable than whiter stones. The "Hope" Diamond has a strong blue fluorescence! (who cares)

    "Diamantens färg har ingenting med kvalité att göra"...I DO NOT agree with what u say!

    " target="_blank">

    ...

    He also talked abt fancy color diamonds at the begining of the video. They're sth else. And they can really get expensive.... Video 05:25min...It showed 1ct D color, IF(clarity) to 1ct E color, IF(clarity) is $ 7,300 per carat!

    "det är helt och hållet en personlig preferens och vissa kan inte tänka sig annat än en kritvit diamant och andra vill hellre ha en lite varm nyans.".....I agree with this.

    If you have unlimited resourses, then the finest of all three elements (colour, clarity, cut) is the best diamond for you. But if your funds are limited then the best looking diamond is frequently that diamond with the highest (least) colour and the best cutting. Unless the marks in a diamond are either eye-visible or potentially damaging, who cares! People get all hung up on VVS and VS grading...neither of which the naked eye can detect (if you can see the marks, it "ain't" VS, or SI for that matter). If the diamond is an engagement stone, chances are you will not be buying it in order to resell it. That being the case, cutting and colour are the most important elements in determining how beautiful the diamond can be. If your funds are very modest, go for finest cutting every time!
    Grading scales In India, Colour takes precedence over Cut. The order or priority for most Indian customers if Colour -> Cut -> Clarity.
    In Southern India, where most customers are particular about dosham (defects), clarity is the most important consideration in selecting a diamond. Here, the order of priority is Clarity -> Colour -> Cut.
    However, if a customer asks for a recommendation, Carat Lane always advices them to prioritize Cut and Colour over Clarity. This is because diamonds up to S1 grade are "eye clean". The inclusions are visible only under the loupe to a trained eye, and does not make any difference to the way the diamond looks.

    The quality of a diamond has three components. Clarity and colour are important but the third element, cut, determines how beautiful the finished diamond will be. Remember, fine colour and fine clarity are all well and good, but without really good cutting your diamond is not going to be as beautiful as it can be.

    so...Which one would u like to choose?Glad

    0.70ct, SI2, I color, 3EX

    0.70ct, VS2, J color, Good cut
    I think we both regard diamonds in the exact same way but describe it differently. What I meant by saying quality in relation to color is that it doesn't affect the diamonds performance in any way. A low color diamond is not a poor diamond it is just a diamond that looks different. Regarding price differences, that is a result of availability and demand. Due to heavy marketing from DeBeers people tend to think that anything else than D-H is crap and have been tricked to pay a premium for this. Diamonds in general aren't especially rare and basically worth very little. What I want to highlight is that color is very personal ant you shouldn't listen to what other people say but rather compare differently coloured stones and see what you prefer. Some are more color sensitive than others.

    Regarding the two choices. I would check myself that the Si2 doesn't have large visible inclusions or feathers that reach the surface or especially the girdle. If it looks fine I would pick that one otherwise I wouldn't buy any of them. I would never buy a stone that isn't GIA 3EX or AGS 000. In addition to that my stones need to have a HCA score below 2.
  • Juul
    KhiraLii skrev 2012-01-25 20:41:33 följande:
    I think we both regard diamonds in the exact same way but describe it differently. What I meant by saying quality in relation to color is that it doesn't affect the diamonds performance in any way. A low color diamond is not a poor diamond it is just a diamond that looks different. Regarding price differences, that is a result of availability and demand. Due to heavy marketing from DeBeers people tend to think that anything else than D-H is crap and have been tricked to pay a premium for this. Diamonds in general aren't especially rare and basically worth very little. What I want to highlight is that color is very personal ant you shouldn't listen to what other people say but rather compare differently coloured stones and see what you prefer. Some are more color sensitive than others.

    Regarding the two choices. I would check myself that the Si2 doesn't have large visible inclusions or feathers that reach the surface or especially the girdle. If it looks fine I would pick that one otherwise I wouldn't buy any of them. I would never buy a stone that isn't GIA 3EX or AGS 000. In addition to that my stones need to have a HCA score below 2.
    I 'd point out that HCA is only a Reject tool, not a picking tool!!

    Use HCA to reject known poor performers and narrow down ur  selection! DO NOT use it for final selection! It will not repalce an analysis with an Ideal-scope and/or an independent appraisal.

    To simply say that the HCA isn't seeing the actual diamond, and is using 4 average numbers to spit out a blind forumula.

    And I don't find it to be particularly useful in this situation.
  • Juul
    Anonym (Diamant) skrev 2012-01-25 19:01:25 följande:
    Oj :) jag lär mig riktigt mycket här! Det står inte vilken cut diamanten har men jag mailat och frågat så det hänger lite på det nu! Det är i och för sig 30 dagars öppet köp med så jag kan ta diamanten till en juvelare så kan de kika på den!
    Skrattande...gör det.

    Har du bestämt dig än?
  • Anonym (Diamant)

    Har fått svar från dem och enligt deras svar så är slipningen mycket god och stenen har en stark brilljans. Jag kommer nog köpa den och låta en juvelare bedöma den ordentligt! Tusen tack för all hjälp :)

  • KhiraLii
    Juul skrev 2012-01-26 10:45:56 följande:
    I 'd point out that HCA is only a Reject tool, not a picking tool!!

    Use HCA to reject known poor performers and narrow down ur  selection! DO NOT use it for final selection! It will not repalce an analysis with an Ideal-scope and/or an independent appraisal.

    To simply say that the HCA isn't seeing the actual diamond, and is using 4 average numbers to spit out a blind forumula.

    And I don't find it to be particularly useful in this situation.
    Självklart något annat har jag inte påstått. Ideal scope och ASET är självklart att föredra men jag känner inte till vart man skulle kunna få den servicen i Sverige. Iofs har jag inte frågat runt heller då jag inte köper diamanter i Sverige.
  • KhiraLii
    Anonym (Diamant) skrev 2012-01-26 11:03:07 följande:
    Har fått svar från dem och enligt deras svar så är slipningen mycket god och stenen har en stark brilljans. Jag kommer nog köpa den och låta en juvelare bedöma den ordentligt! Tusen tack för all hjälp :)
    Hoppas vi inte rör till det för mkt med alla termer men jag tycker det låter som en bra idé. Iom att du har öppet köp och den är superbillig så vorde det ju dumt att inte få den utvärderad när möjligheten finns.
Svar på tråden Diamantkvalitet! Hjälp snälla!